FAQ

Home Downloads

Application Highlights.

dngrcoin-qt

At the first start, the graphic wallet "dngrcoin-qt" creates its working folder, the wallet file "wallet.dat", "dngrcoin.conf" and the blockchain.

Sending coins, viewing balance, etc. intuitive.

A command to launch a graphical wallet on linux

./dngrcoin-qt

To start mining on the processor in a graphic wallet, you need to go into it

to the "Tools" tab, select the "Debug console" and enter the command:

setgenerate true

to stop mining:

setgenerate false

dngrcoind

For a simplified auto-installation, you can use the DNGRinstall.sh script

wget https://raw.githubusercontent.com/dngrcoin/dngrcoin/master/DNGRinstall.sh

bash DNGRinstall.sh

after installation, check the availability of port 49002 for dngrcoind and port 22 for SSH connections

Manual installation: the libraries must be installed for the console wallet to work. This can be done with one common command in the terminal:

sudo apt-get update && sudo apt-get upgrade -y && sudo apt-get install software-properties-common build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev -y && sudo apt-get update -y && sudo add-apt-repository ppa: bitcoin / bitcoin && sudo apt-get update -y && sudo apt-get install libdb4.8-dev libdb4.8 ++ - dev libminiupnpc-dev libzmq3-dev libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttoolsuf5-dev-tools libprotobuf-compiler- dev protobuf5 dev mc -y

Then download the application:

wget https://github.com/dngrcoin/dngrcoin/releases/download/v1.7.4/dngrcoind-for-ubuntu-16.04.tar.gz

Unpack:

tar -xvzf dngrcoind-for-ubuntu-18.04.tar.gz

Delete the already unnecessary archive:

rm -rf dngrcoind-for-ubuntu-18.04.tar.gz

Run:

./dngrcoind -daemon

Check the number of synchronized blocks:

./dngrcoin-cli getinfo

Stop:

./dngrcoin-cli stop

We edit the automatically created dngrcoin.conf configuration file

nano ~ / .dngrcoin / dngrcoin.conf

The first time you start the console daemon wallet "dngrcoind", a working folder is also created, the wallet file "wallet.dat", "dngrcoin.conf" and the blockchain

After the first launch, you need to add a user to the dngrcoin.conf file to enter commands:

rpcuser = lyuboeznachenie

rpcpassword = tojelyuboeznachenie

To start the console application, enter the command:

./dngrcoind -daemon

After that, the wallet will start and start working in daemon mode

Then, to manage the wallet, enter the commands for "dngrcoin-cli"

./dngrcoin-cli stop - turn off the wallet

./dngrcoin-cli getinfo - general information

./dngrcoin-cli getwalletinfo - wallet information

./dngrcoin-cli getmininginfo - mining status

./dngrcoin-cli getpeerinfo - information about connections to other wallets (nodes)

./dngrcoin-cli setgenerate true 1 - launch mining on the processor

./dngrcoin-cli setgenerate false - stop mining

./dngrcoin-cli help - list of commands

./dngrcoin-cli sendtoaddress dJvL1pxyeXphvucqhwnAVKtdiMHmh9Y5j7 15 - transfer command 15 coins to the specified DNGR address

./dngrcoin-cli instantsendtoaddress dJvL1pxyeXphvucqhwnAVKtdiMHmh9Y5j7 15 - instant transfer command 15 coins to the specified DNGR address (maximum 999 coins)

./dngrcoin-cli listaddressgroupings - displays a list of addresses of your wallet with balances

For work, the wallet uses the port:

49002 - the main network (mainnet)

Here, work with wallets is described in more detail, instead of "bitcoin" use "dngrcoin" https://webhamster.ru/mytetrashare/index/mtb0/1548772603evvc8qldqp

If you want to compile wallets from source, download the source and enter the commands:

./autogen.sh

./configure

make

make install

Instructions for installing and configuring a masternode

To configure the masternode, you need a constantly working wallet (console or graphic) on a virtual server (or computer) with a static IP. You can configure everything on one wallet, or classic on a two-server wallet with a masternode, on a home wallet with a deposit of 5000 coins, so that the coins are under control

We configure masternode on VPS + locally

ON VPS WE CONFIGURE A HOT WALLET

LOCALLY CONFIGURING A COLD WALLET

Brief and sufficient instruction.

Configuring masternode:

in a local cold wallet:

enter the command getaccountaddress MN1

Get a new address, for example dJvL1pxyeXphvucqhwnAVKtdiMHmh9Y5j7

We transfer 5000 dngr to it, we are waiting for 15 confirmations for the masternode

Then the masternode genkey command

get a master boot, for example:

3gp9CbNXPTQeQfY4cvZFUjPAzRKRZeq382nsSrM9dCkAyD4Pt3j

Then the team

masternode outputs

we get, for example, "44836fd4b2c74737ba250ae1b07fa3e83ffb987f1ab95e3fdedaeb8d8d144c20": "1"

We enter the received values ‚Äč‚Äčinto a file

masternode.conf:

Mn1 125.125.125.125:49002 3gp9CbNXPTQeQfY4cvZFUjPAzRKRZeq382nsSrM9dCkAyD4Pt3j 44836fd4b2c74737ba250ae1b07fa3e83ffb987f1ab95e3fdedaeb8d8d144c20 1

where instead of 125.125.125.125 we use our public IP address VPS

On VPS Hot:

edit (add the above received masternodeprivke) dngrcoin.conf file:

rpcuser = lyuboeznachenie

rpcpassword = tojelyuboeznachenie

rpcallowip = 127.0.0.1

listen = 1

server = 1

daemon = 1

masternode = 1

externalip = 125.125.125.125

masternodeprivkey = 3gp9CbNXPTQeQfY4cvZFUjPAzRKRZeq382nsSrM9dCkAyD4Pt3j

After making changes to masternode.conf and dngrcoin.conf, wallets need to be reloaded

Then on local:

start masternode

./dngrcoin-cli masternode start-all

or

./dngrcoin-cli masternode start-alias MN1

On VPS check:

./dngrcoin-cli masternode status

Mining instructions

To run straw mining on your computer with miner programs, you need:

1. Install dngrcoin app

2. Install a miner program (for example, ccminer, sgminer or any other miner that supports the lyra2z algorithm and is suitable for your computer, video card).

3. Start the miner by writing in the config (in the bat-file, if windows, or in the launch command on linux):

-a lyra2z -o http://127.0.0.1:49003 -u rpcuser -p rpcpassword --coinbase-addr = dUVkvXrq8bBhfuFeCuiB84E7bTMVEExQoY

where rpcuser and rpcpassword are taken from dngrcoin.conf, and in --coinbase-addr = we specify the address to which we want to receive coins.

To start solomining using your masternode on a VPS, miner programs need:

1. Install a miner program (for example, ccminer, sgminer or any other miner that supports the lyra2z algorithm and is suitable for your computer, video card).

2. Start the miner by writing in the config (in the bat file if windows, or in the launch command on linux):

-a lyra2z -o http://125.125.125.125:49003 -u rpcuser -p rpcpassword --coinbase-addr = dUVkvXrq8bBhfuFeCuiB84E7bTMVEExQoY

where 125.125.125.125 is the ip of your masternode, rpcuser and rpcpassword are the same as in dngrcoin.conf on the VPS, and the address is where we want to receive the reward.

In dngrcoin.conf on the VPS, you need to add permission to connect to it from the outside with the line rpcallowip = and specify the ip of your miner, and you need to open port 49003 on the VPS.

To start mining on mining pools, you need:

1. Install a miner program (for example, ccminer, sgminer or any other miner that supports the lyra2z algorithm and is suitable for your computer, video card)

2. Start the miner by writing in the config (in the bat-file, if windows, or in the launch command on linux):

-a lyra2z -o stratum + tcp: //pool.dangercoin.org: 4553 -u dQxWmf4ceTVKQ7Abtpi1Wok1zs6nhopPkf -p c = DNGR

where pool.dangercoin.org is the address of the pool (you can choose any pool of your choice), -u dQxWmf4ceTVKQ7Abtpi1Wok1zs6nhopPk is the user-address where you will receive the reward,

-p c = DNGR is the password for mining DNGR.